<track id="teouh"></track>

  1. PRODUCT產品中心

    產品中心
    意大利TRAMEC
    意大利TRAMEC
    意大利TRAMEC成 立于1986年,TRAMEC最初主要生產斜螺旋變速箱,平行軸齒輪箱,軸安裝變速箱和右角變速箱。經過多年的發展,TRAMEC的產品范圍得到擴展,例 如行星加速計和螺紋減速機。TRAMEC公司為每一臺減速器提供精密數據,確保應用系統的高可靠性,模塊化的法蘭和軸襯設計 適用于任何廠商和形式的需要.這種節省空間的革新方案使皮帶輪、小齒輪(與齒條嚙合)或桿可以直接與減速機的輸出軸連接。

    TRAMEC的主要產品:
    意大利TRAMEC減速機
    X系列螺紋減速機,
    H系列螺紋減速機,
    K系列螺紋減速機,
    XX系列螺紋雙聯減速機,
    KX系列螺紋雙聯減速機,
    KK系列螺紋雙聯減速機,
    T系列斜螺旋減速機,
    Z系列平行齒輪軸產品,
    P系列軸安裝變速箱,
    M系列軸安裝變速箱,
    R系列直角變速箱,
    RL系列直角變速箱,
    REP系列精度行星減速機,
    EP系列標準行星減速機,
    GN系列帶尼龍圈彈性聯軸器,
    VSF.2 USC系列輸出雙聯螺紋減速箱,
    N系列速度振動器.
     

    TRAMEC減速機產品描述:
    意大利TRAMEC EP系列,全面替代原來的RDS系列,但是取消了原來RDS系列的FF(法蘭輸出)形式.
    單級<15 arcminutes 速比系列為3,4,5,7,10
    雙級<20 arcminutes 速比系列為9,12,15,16,20,25,28,35,40,50,70,100
    單級<15 arcminutes 速比系列為3,4,5,7,10
    雙級<20 arcminutes 速比系列為9,12,15,16,20,25,28,35,40,50,70,100
    單級<15 arcminutes 速比系列為3,4,5,7,10
    雙級<20 arcminutes 速比系列為9,12,15,16,20,25,28,35,40,50,70,100
    特點:
    精密的磨齒技術行星齒輪 采用超精密衍磨,使齒輪間配合更加優化。實現低背隙、低噪音、更增加齒輪的使用壽命
    先進的表面處理工藝滲氮鋼機殼,增強環境耐受性、耐腐蝕性
    嚴格的監測流程 TRAMEC公司為每一臺減速器提供精密數據,確保應用系統的高可靠性
    模塊化的法蘭和軸襯設計 適用于任何廠商和形式的電機
    良好的密封設計 長壽命潤滑劑無需維護 REP型減速器的技術參數 TRAMEC制造的REP系列行星齒輪減速機具有極高的工作精度及可靠性。 比EP系列精度更高. 單級<4 arcminutes 速比系列為3,4,5,6 雙級<6 arcminutes 速比系列為9,12,16,20,24,30,36 三級<8 arcminutes 速比系列為27,36,48,64,80,100,120,144,180,216
    高效率(<=97%),大扭矩(<=450Nm)
     

    RIGHT ANGLE GEARBOXES

    SERIES R

    Built in five sizes with three types of output shaft : hollow, projecting or double-extended. Moreover, an additional output shaft can be installed opposite the input shaft.

    Three input types are available : with projecting input shaft, with pre-engineered motor coupling (bell and joint) and pre-engineered COMPACT motor coupling.

    Gear unit body in engineering cast iron, EN GJL 200 UNI EN 1561 ribbed internally and externally to guarantee rigidity and machined on all surfaces for easy positioning. The single lubrication chamber guarantees improved heat dissipation and better lubrication of all the internal components.

    The mechanism of these gearboxes consists of two GLEASON spiral bevel gears with precision ground profile, 16CrNi4 or 18NiCrMo5 UNI7846 steel.

    The use of high-quality tapered roller bearings on all shafts (except for the input sleeve on the compact motor coupling, which is supported by angular ball bearings) ensures long life, and enables very high external radial and axial loads.

    Configurazione
     

    RIGHT ANGLE GEARS

    SERIES RL

    RL Series right-angle drives are designed for industrial applications where rotary power must be transferred between two shafts at right-angles to each other. RL series units are available in 6 different sizes with 2 or 3 outputs and with 1:1 or 1:2 transmission ratios

     

    PARALLEL GEAR SHAFT UNITS

    SERIES Z

    Built in 6 sizes with single reduction stage, in 6 sizes with two reduction stages and in 6 sizes with three reduction stages.

    Two input types are available : with projecting input shaft, with pre-engineered motor coupling (bell and joint).

    Gear unit body in engineering cast iron, EN GJL 200 UNI EN 1561 (71-180) or spheroidal graphite cast iron EN GJS 400-15U UNI EN 1563 (200-225). It is ribbed internally and externally to guarantee rigidity it is machined on all surfaces for easy positioning. The single lubrication chamber guarantees improved heat dissipation and better lubrication of all the internal components.

    The helical spur gears are built in 16CrNi4 or 18NiCrMo5 UNI7846 quench-hardened and case-hardened steel. The first stage is ground.

    The use of high-quality tapered roller bearings on all shafts ensures long life, and enables very high external radial and axial loads.

    The standard hollow output shaft made of steel (shrink disc available on request), the option of mounting an output flange on the side opposite to the input shaft the possibility of mounting a backstop device make these gear units extremely versatile and easy to install.

    Configurazione
     

    PRECISION PLANETARY GEARBOXES

    SERIES REP

    Our gearboxes are manufactured for prevailing utilization in the following applications:

    • Machine tools
    • Machines for woodworking
    • Transfer machines
    • Printing machines
    • Automatic machines for packaging
    • Automation
    • Mechanical hands
    • Silk-screen process machines
    • Linear guides

    The REP series is available in 4 sizes (075, 100, 125 and 150), with 1, 2 or 3 reduction stages, with two or three types of output shaft (AU...) and two types of output flange (FLT and FLQ).

    Housing: made of special nitrided steel to assure strength, high reliability and long life.

    Flanges: input and output flanges made of aluminium and available in several versions.

    Shafts: made of hardened and tempered alloy steel.

    Gears: made of casehardened and tempered alloy steel, with ground toothing.

    Bearings: high quality and suitably sized to assure long life and noiseless working.

     

     

    MOTOINVERTER

    SERIES MOTOINVERTER

    Drivemot – Asynchronous Motors with Integrated Inverter
    Voltage = Single/Three-Phase 230V – Three-Phase 400V 
    Power = 0.10 – 22 KW 
    Control Method: V/F - Sensorless Vector EMC 
    Filter = Integrated 
    Communication Protocols = *CanOPEN – Modbus RS485 – *Profibus-DP

    * = Optional

     

    MOTORS - DRIVE BRUSHLESS

    SERIES BRUSHLESS

    Motors/Drive Brushless
    Voltage = Single-Phase 230V – Three-Phase 400V
    Stall Torque = 0.2 – 115 Nm
    EMC Filter = Integrated
    Communication Protocols = CanOPEN

    IBD – Integrated Brushless Drive
    Voltage = 310 ÷ 750 Vdc
    Stall Torque = 2.8 – 16 Nm
    Communication Protocols = CanOPEN – EtherCAT

     
     
     
    電 話
    地 圖
    分 享
    郵 件
    盈彩网